Martha sensor smart shower room knowledge
一.Structure composition of automatic induction shower room
The automatic sensor shower room is a new product developed by Martha. Here, only the translational sensor automatic shower room is taken as an example to introduce the components of the automatic sensor shower room.：
（1）Main controller: It is the command center of the induction shower room. Through a large-scale integrated block with internal command programs, it sends out corresponding instructions to direct the operation of motors or electric lock systems; at the same time, people use the main controller to adjust the opening speed and opening of the door leaf Parameters such as amplitude.
（2）Induction detector: It is responsible for collecting external signals, just like people's eyes. When a moving object enters its working range, it will give a pulse signal to the main controller；
（3）Power motor: Provides the main power for opening and closing the door, and controls the acceleration and deceleration of the door leaf.
（4）Door leaf travel track: Just like a train track, the door leaf’s hanging clamp walking wheel system is constrained to make it travel in a specific direction.
（5）Door leaf hanging clamp walking wheel system: used for hanging the movable door leaf, and at the same time driving the door leaf to run under power traction.
（6）Synchronous belt: used to transmit the power produced by the motor, to pull the door leaf hanging clamp and walking wheel system.
（7）Lower guide system: It is a guide and positioning device for the lower part of the door leaf to prevent the door leaf from swinging back and forth during operation.
（8）The automatic induction shower room is equipped with an induction door machine, which is a collective name for a series of components that control the opening and closing of the automatic shower room; also called automatic door unit or induction door unit; induction door machine components generally include: electric motors, intelligent controllers, Pulleys, belts.
二.Automatic control principle of automatic induction door
The automatic shower room itself is equipped with an induction probe that can emit an infrared signal or microwave signal. When this signal is reflected by a close object, it will automatically open and close.
