Precautions for shower room installation
Caring about the installation precautions of the shower room is a problem we must face in pursuing the bathroom culture, because we must consider the service life and effect of the shower room, and try to be able to enjoy the pleasure of showering without worrying too much about the tedious cleaning caused by the overflow of dirty water. Therefore, it is very important to pay attention to the installation precautions of the shower room. Today we will discuss the precautions about the installation of the shower room together.
Precautions for the installation of the shower room: When transporting, the shower room is easily broken when transported horizontally. It must be transported vertically and by two or more people at the same time, and pay attention to avoid collision with hard objects.
Note 2: After the shower room is unpacked, please place the glass vertically against the wall steadily. Horizontal or uneven placement may cause damage to the glass, causing property damage or personal injury.
Precautions for installation of shower room three: It is strictly forbidden to use acid, alkali, organic solvent chemicals and acidic cleaners when cleaning, otherwise it will damage the surface of the product; use water or neutral detergent to clean the surface of the product, and it will not remove the dirt. The stains can be removed with a cleaning cloth dipped in a small amount of alcohol;
Note four for installation in the shower room: Acrylic plates are easily attached to dust due to static electricity. When cleaning the acrylic bottom basin, only a cotton cloth dipped in soapy water can easily remove the dust and achieve a cleaning effect.
Note 5 for shower room installation: When using sealed silicone, do not apply silicone on the surface of acrylic sanitary ware. If you accidentally apply a little, remember not to rush to wipe it, it is more difficult to remove it, you should wait for it to be cured and then gently peel it off. It is strictly forbidden to scratch with a hard object, otherwise it will cause surface damage. After the bottom basin is installed, it should be used after the silicone is completely cured (silicone curing time is 24 hours).
